Specifications

106 Chapter4
Changing Your Workstation’s Hardware Configuration
Removable Media Devices
chassis as shown in Figure 4-26.
7. Plug the floppy power cable into its connector. Next, plug the data
cable into its connector. Note that the connectors are keyed for proper
insertion. See Figure 4-27.
NOTE The red striped side of the floppy data cable is positioned toward the
power cable.
Figure 4-27 Plugging in the Floppy Data and Power Cables
8. Tighten the two floppy disk drive bracket screws as shown in Figure
4-28.
Power
Cable
Data Cable