User's Manual

Virtual Connect networks 91
The following table describes the available actions in the Network Access Groups screen.
Task Action
View networks that are members of a
network access group
Click the network access group name.
Filter the list of networks in a network
access group
On the Alphabetic tab, click a letter to show only network names that
begin with that group of letters, or click All to show all networks
alphabetically. On the Filter tab, use the pull-down menus to select the
networks you want to view, and then click Go.
Add a new network access group
("Define Network Access Group screen"
on page 91)
Click new.
Edit a network access group ("Edit
Network Access Group screen" on page
92)
Click the network access group name, and then click Edit.
Delete a network access group
Click the network access group name, and then click Delete. You cannot
delete the Default network access group.
Define Network Access Group screen
To access this screen, click Add at the bottom of the Network Access Groups screen (on page 90), or select
Network Access Groups from the Define pull-down menu.
To add a network access group:
1. Enter a name for the network access group in the Network Access Group Name field. The name can
consist of up to 64 alphanumeric characters, including the hyphen (-), underscore (_), and period (.).
2. To filter the list of available networks:
o On the Alphabetical tab, click a letter to show only network names that begin with that group of
letters, or click All to show all networks alphabetically.