User's Manual

Virtual Connect networks 88
VLAN tags are mapped to networks. Untagged frames are mapped to the native VLAN, if present.
Otherwise, they are dropped. Server frames are untagged only, and tagged frames are dropped. Each
server port is connected to a single network.
Managing networks
Use the following screens to manage Virtual Connect networks:
• Network Access Groups screen (on page 90)
o View networks that are members of a network access group
o Add a new network access group
o Edit the properties of an existing network access group
o Delete a network access group
• Define Network Access Group screen (on page 91)
o Define a new network access group
• Edit Network Access Group screen (on page 92)
o Edit the properties of an existing network access group
• Ethernet Settings (MAC Addresses) screen (on page 177)
o Select whether to use Virtual Connect assigned MAC Addresses or factory-default MAC Addresses
o Select the type and range of MAC Addresses
• Ethernet Settings (Port Monitoring) screen (on page 93)
o Duplicate network traffic to an unused uplink port to monitor or debug network traffic on those server
ports
• Select Monitored Ports screen (on page 95)
o Select server ports to monitor
• Ethernet Settings (Advanced Settings) screen ("Ethernet Networks (Advanced Settings)" on page 97)
o Set Server VLAN Tagging Support