User's Manual

Virtual Connect domains 37
• Supported CIM classes:
o CIM_ComputerSystem
o CIM_FCPort
o CIM_Location
o CIM_SoftwareIdentity
o CIM_Product
o CIM_PhysicalPackage
o CIM_FCPortCapabilities
o CIM_FCPortSettings
o CIM_FCSwitchSettings
o CIM_RemoteSeviceAccessPoint
o CIM_SettingData
o CIM_Namespace
o CIM_ConnectivityCollection
Supported CIM clients have no restrictions.
SNMP Configuration (Users)
Use this screen to create SNMPv3 users. SNMPv3 users are required before adding an SNMPv3 trap
destination. SNMPv3 users are created on each of the supported VC modules in the VC domain. These users
are used to query the managed objects maintained by VC and send SNMPv3 traps.
The following table describes the fields on the SNMP Users tab:
Field name Description
User Name
SNMP user name
Engine ID
Engine ID for remote users. Must begin with 0x followed by up to 64 hexadecimal
characters
Authentication
Authentication protocol of the SNMP user, either None, MD5, or SHA1
Privacy
Privacy protocol of the SNMP user, either None, DES, or AES128
MinSecurityLevel
Security level set for the SNMP user