User's Manual

Virtual Connect domains 33

MIB VC-Enet VC-FC

RFC 1213 Network Mgmt

X —

RFC 4293 IP-MIB

X —

Fibre Alliance MIB (FC Mgmt Integ)

— X

RFC 2837 Fabric Element MIB

— X

VC Module MIB (VCM-MIB)

X —

VC Domain MIB (VCD-MIB)

X —

IEEE LLDP MIB (LLDP-MIB)

X —

IEEE LLDPv2 MIB (LLDPv2-MIB)

—

IEEE8023 LAG MIB (LAG-MIB)

X —

VC QOS MIB (VC-QOS-MIB)

X —

* Not supported by the HP 8Gb 24-Port FC Module

The VC Module MIB is a VC-specific MIB that describes the state of a specific VC module. In addition to

unique VC module attributes, it defines traps for reporting alerts on port statistics, such as throughput, errors,

and discards. The VC Domain MIB combines domain-wide attributes with traps for state changes in VC

managed objects.

SNMP Configuration (VC-Enet)

By enabling SNMP for VC-Enet modules, network management systems can monitor modules in the domain

for events that might require corrective actions, such as warnings and errors. You must have network or

domain user permissions to administer SNMP settings.

SNMP settings for Ethernet Modules apply to all VC-Enet modules in the Virtual Connect domain. SNMP

settings for Fibre Channel modules apply to all VC-FC modules in the VC domain.

NOTE: If FIPS mode is enabled for the domain, SNMPv3 is enabled as the default SNMP

version. SNMPv1 and SNMPv2 are disabled, and traps for these versions cannot be added. The

security level for an SNMPv3 trap or inform must be set to AUTHPRIV.