User's Manual

Maintenance and troubleshooting 288
Restart after OA credential recovery
The state "profile recovered," is applied to servers that are powered up when VC Manager restarts after an
OA credential recovery. When VC Manager detects a restart after a credential recovery, it rewrites the
profile parameters for any server that is powered up, connects the server to the appropriate Ethernet networks
and FC fabrics, and then puts the server and profile in the "profile recovered" state. The server and profile
remain in the "profile recovered" state until the server is powered down or removed from the enclosure. This
feature eliminates the power cycle requirement for a server to recover.
Additional information
The following links provide information on Virtual Connect:
• HP Virtual Connect Technology website (http://www.hp.com/go/virtualconnect)
o Download a free copy of HP Virtual Connect for Dummies
o Access QuickSpecs for VC modules
— The QuickSpecs for each module contain information on required cabling and available cables
o Access support information for Virtual Connect
• HP Virtual Connect support website (http://www.hp.com/support/vc)
o Download drivers and software
o Troubleshoot a problem
o Setup, install, and configure
• HP Subscriber's Choice website (http://www.hp.com/go/myadvisory) to sign up for email alerts on:
o Driver updates
o Software updates
o Firmware updates
o Customer advisories