User's Manual

Virtual Connect modules 235
Enclosure Information screen
The following table describes the rows within the Enclosure Information screen.
Row Description
Part Number
The part number to be used when ordering an additional enclosure of this type
Product Name
The common descriptive name of the enclosure
OA IPv4 Address
IPv4 IP address for the OA
OA IPv6 Address
IPv6 IP address for the OA
Serial Number
The unique serial number of the enclosure
Asset Tag
If configured, the asset tag of the enclosure, used for inventory control
Manufacturer
Name of the enclosure manufacturer
Spare Part Number
The part number to be used when ordering a replacement enclosure
Rack Name
Name of the enclosure rack (assigned through the Onboard Administrator)
Time Zone
The time zone assigned to the enclosure
Blade Bays
Number of device bays in the enclosure
Interconnected Trays
Number of interconnect trays in the enclosure
Removing an enclosure
To remove a remote enclosure from the domain:
1. Disassociate all profiles, networks, port sets, and port monitors from the enclosure.
If the enclosure is currently in a No-COMM state, the remote enclosure remains in VC mode. The
No-COMM condition must be repaired prior to the enclosure removal.
2. Take the enclosure out of VC mode manually with the Onboard Administrator command line for that
enclosure.