Setup and Install

HP Virtual Connect Manager 87
For more information about the data displayed on this screen, see "Ethernet Networks (External Connections)
screen" in the user guide.
To define additional networks in the domain, click Create more networks.
To complete the Network Setup Wizard, click Done.
To view a filtered list of created networks, click Filter, select the criteria, and then click Go. To return to the full
list, click X.
Finish network wizard
When the Network Setup Wizard completes, external Fibre Channel connectivity can be configured (if
applicable) or server profiles can be defined and associated with server blades.
To establish external Fibre Channel connectivity:
1. Be sure the Start the Fibre Channel Wizard checkbox is selected.
2. Click Finish. The Fibre Channel Wizard Welcome screen is displayed.
To begin deploying server blades:
1. Be sure the Start Fibre Channel Wizard checkbox is not selected.
2. Click Finish.
3. Select Define Server Profile from the homepage.
Additional network connections can be defined at any time by using one of the following methods:
• Select the Define a Network link on the homepage.
• Select the Define a Shared Uplink Set link on the homepage.