Setup and Install

HP Virtual Connect Manager 65
VCM creates a local user named "vcmuser" on the OA module. Do not modify the credentials for this user.
Do not change the "local users" authentication setting for the OA module.
Enclosure Import/Recovery
After VCM has successfully established contact with the Onboard Administrator, you can create a Virtual
Connect domain by importing the enclosure or by restoring a previously created Virtual Connect domain
from a saved configuration file.
If you plan to use double density server blades, select the "Enable double dense server support (Restricts
single dense server support)" checkbox to display server device bays as double density slots.
This option should only be selected if double-dense servers will be in use. Single-dense servers do not have
access to I/O bays 7 and 8 when this option is selected.
NOTE: This option cannot be modified. After the enclosure is imported, select the Display single
dense device bays checkbox on the Domain Settings (Configuration) screen to display server
device bays as single density slots again.
For more information, see "Using double-dense server blades (on page 68)."
Select the appropriate method for creating the Virtual Connect domain.
• To create the Virtual Connect domain by importing an enclosure, select the "Create a new Virtual
Connect domain by importing this enclosure" radio button, and then click Next. This process can take
several minutes as VCM establishes contact with each module in the enclosure and identifies its
capabilities.