Setup and Install

Installation 17
[Bay 3] Other/empty
[Bay 4] Other/empty
[Bay 1] VC Ethernet
[Bay 2] VC Ethernet
[Bay 3] VC Ethernet
[Bay 4] VC Ethernet
[Bay 1] VC Ethernet
[Bay 2] VC Ethernet
[Bay 3] VC-FC
[Bay 4] VC-FC
[Bay 1] Other/empty
[Bay 2] Other/empty
[Bay 3] VC Ethernet
[Bay 4] VC Ethernet
IMPORTANT: The HP Virtual Connect FlexFabric 10Gb 24-port Module and HP Virtual Connect
Flex-Fabric-20/40 F8 Module are not supported in c3000 enclosures.
The use of an HP VC-Enet in bay 1 and a Fibre Channel module (for example, VC-FC, SNA
switch, or FC pass-thru) in bay 2 is not supported in c3000 enclosures.
IMPORTANT: The HP Virtual Connect Flex10/10D Module is supported in c3000 enclosures as
an Ethernet only module.
HP BladeSystem c7000 Enclosure supported configurations
The following tables show a number of typical, supported configurations for an HP BladeSystem c7000
Enclosure.
In the following tables, "Other" indicates any c-Class interconnect module including a VC, Pass-Thru, or
switch.
[Bay 1] VC Ethernet
[Bay 2] Empty
[Bay 3] Other/empty
[Bay 4] Other/empty
[Bay 5] Other/empty
[Bay 6] Other/empty
[Bay 7] Other/empty
[Bay 8] Other/empty
[Bay 1] VC Ethernet
[Bay 2] VC Ethernet
[Bay 3] Other/empty
[Bay 4] Other/empty
[Bay 5] Other/empty
[Bay 6] Other/empty
[Bay 7] Other/empty
[Bay 8] Other/empty
[Bay 1] Other/empty
[Bay 2] Other/empty
[Bay 3] VC Ethernet*
[Bay 4] VC Ethernet
[Bay 5] Other/empty
[Bay 6] Other/empty
[Bay 7] Other/empty
[Bay 8] Other/empty
*Requires minimum VC v3.10 firmware
[Bay 1] VC Ethernet
[Bay 2] VC Ethernet
[Bay 3] Other/empty
[Bay 4] Other/empty
[Bay 5] VC Ethernet
[Bay 6] VC Ethernet
[Bay 7] Other/empty
[Bay 8] Other/empty
[Bay 1] VC Ethernet
[Bay 2] VC Ethernet
[Bay 3] VC Ethernet
[Bay 4] VC Ethernet