Setup and Install

Component identification 113
Item LED description Status
2
Module status Green = Normal operation
Amber = Degraded condition
Amber flashing = Fault condition
Off = Power off
3
L/A
Green = Port LEDs are in Link/Activity mode
4
PID Green = Port LEDs are in Port Identifier mode
5
FC Mode Green = Port LEDs are in FC mode
6
Ethernet Green = Port LEDs are in Ethernet mode
7
8
9
10
11
12
13
14
X1-X8 port status PID mode
The PID mode LED is lit green.
Port LEDs:
Amber = The port is configured as an Enet
stacking link or an FC port is not on-line or
logged in.
Green = The port is configured as an Enet
uplink port or an FC port connected to a
switch
Light Purple = The port is configured as an
Enet mirror-to-port.
Red = The port has an error such as an invalid
or unsupported pluggable module detected
Blue = Port identification (locator)
L/A mode
The L/A mode LED is lit green.
Port LEDs:
Green = The port is configured and operating
as an uplink port connected to a data center
fabric at either 10GbE or 4Gb FC.
Green flashing = Port activity at either 10GbE
or 4Gb FC.
Amber = The port is configured and
operating as an uplink port connected to a
data center fabric at either 1GbE or 8Gb FC.
Amber flashing = Port activity at either 1GbE
or 8Gb FC.
Orange = The port is configured and
operating as an uplink port connected to a
data center fabric at 2Gb FC.
Orange flashing = Port activity at 2Gb FC.
Red = Port error, invalid or unsupported
pluggable module detected.
Off = No link
Fibre Channel mode
Green = Port is configured for FC.
Off = Port is not configured for FC.
Ethernet mode
Green = Port is configured for Ethernet.
Off = Port is not configured for Ethernet.
15
16
17
18
Qx port status
For each QSFP+ port configured in 1x40G
mode, the first of the four ports (Qn1) is used
and Qn2 through Qn4 are inactive. For each
QSFP+ port configured in 4x10G mode,
each of the four LEDs represents one 10Gb