User's Manual

Command line 93
Item Description
to restore network connectivity.
Changing this option requires you to power off the server.
Nag (optional)
The new network access group for the server profile. If not specified, the profile’s
network access group is not changed.
bootMode (optional)
Configures the boot mode. Valid values are:
•
Auto—Default boot option
•
Legacy—Legacy BIOS
•
UEFI—Unified Extensible Firmware Interface
Verify the server supports UEFI before configuring the boot mode.
Examples
->set profile MyProfile Name=MyNewProfileName
Changes the name of a server profile
->set profile Profile1 EFIState=absent
Removes EFI partition block information from a profile
->set profile Profile1 HideUnusedFlexNICs=true
Does not enumerate FlexNICs not assigned to a profile as network interfaces in the
operating system
->set profile Profile1 Nag=NetGroup1
Changes the profile's network access group to NetGroup1
Item Description
show profile
Display all server profiles that exist in the domain and a summary of the associated
Ethernet, iSCSI, FC, and FCoE connections.
To view detailed information for the connections, use the show
enet-connection, show iscsi-connection, show fc-connection,
or
show fcoe-connection
commands.
Syntax
show profile [<ProfileName>|*]
Parameter
ProfileName
(optional)
The name of an existing profile in the VC domain. Use "*" to display all existing
profiles. If not specified, a summary of all profiles appears.
Examples
->show profile
Displays a summary of all server profiles
->show profile *
Displays detailed information for all profiles
->show profile MyProfile
Displays detailed information for a specific profile
Item Description
unassign profile
Unassign a server profile from a device bay.
Syntax
unassign profile <ProfileName>
Parameter
ProfileName
(required)
The name of a server profile currently assigned to a device bay
Example
->unassign profile MyProfile1
Unassigns a server profile from a device bay