User's Manual

Command line 88
Item Description
Resets the port-protection state on all ports currently disabled due to the port
protection action
Item Description
set port-protect
Modify the domain wide configuration for port protection against the following
denial of service conditions:
•
Network loop protection for server downlink ports
•
Pause flood protection for downlink physical ports
Syntax
set port-protect [-quiet] [networkLoop=<Enabled|Disabled>]
[pauseFlood=<Enabled|Disabled>]
Option
quiet (optional)
Suppresses user confirmation prompts. This option is useful when scripting
operations.
Properties
networkLoop
(required)
Enables/disables downlink network loop detection and protection. Valid values are
"Enabled" and "Disabled".
pauseFlood
(required)
Enables/disables pause flood detection and protection. Valid values are "Enabled"
and "Disabled".
Example
->set port-protect networkLoop=Enabled PauseFlood=Enabled
Sets the global option to enable the loop protection and pause flood protection
Item Description
show port-protect
Display the loop protection and pause flood protection.
Syntax
show port-protect
Example
->show port-protect
Displays the loop protection and pause flood protection
profile
Manage server profiles.
NOTE: For information on nPartitions and assigning a VC profile to an nPar, see the HP Virtual
Connect for c-Class BladeSystem User Guide on the HP website
(http://www.hp.com/go/vc/manuals
).
Supported actions: add, assign, copy, help, load, remove, save, set, show, unassign
Item Description
add profile
Create a new server profile.
After the profile is created, configure the profile using the "set" subcommand and
add additional network, fabric, and FCoE connections. The server profile can be
assigned to a device bay using the "assign" subcommand.
Profiles are created without FCoE connections if the QoS type is set to
"CustomNoFcoe". For more information about setting the QoS type, see "qos (on
page 97)."
Syntax
add profile <ProfileName> [-NoDefaultEnetConn]
[-NoDefaultFcConn] [-NoDefaultFcoeConn] [Nag=<nagName>]