User's Manual

Command line 77
Item Description
set network-
access-group
Modify an existing network access group.
Syntax
set network-access-group <Name> Name=<NewName>
Parameter
Name (required)
The name of an existing network access group to modify
Property
Name (required)
The new name of the network access group
Example
->set network-access-group NetGroup1 Name=NetGroup2
Changes the name of an existing network access group from NetGroup1 to
NetGroup2
Item Description
show network-
access-group
Display all network access groups in the domain.
Syntax
show network-access-group [<Name>|*]
Parameter
Name (optional)
The name of an existing network access group in the VC domain. Use "*" to display a
detailed view of all the network access groups. If not specified, a summary view of all
network access groups appears.
Examples
->show network-access-group
Displays a summary of all network access groups
->show network-access-group *
Displays detailed information for all network access groups
->show network-access-group DatabaseNetGroup
Displays detailed information for a specific network access group
network-range
Manage multiple networks in a shared uplink set.
Supported actions: add, help, remove, set
Item Description
add network-range
Create multiple networks in a shared uplink set.
Syntax
add network-range [-quiet] UplinkSet=<UplinkSetName>
[NamePrefix=<prefix>] [NameSuffix=<suffix>]
VLANIds=<VLAN range list> [State=<enabled|disabled>]
[PrefSpeedType=<auto|custom>] [PrefSpeed=<100Mb-
20Gb
in 100Mb steps>]
[MaxSpeedType=<unrestricted|custom>]
[MaxSpeed=<100Mb-20Gb in 100Mb steps>]
[Nags=<Name1>[<Name2>,...]
[SmartLink=<enabled|disabled>]
[Labels=<Label1>[<Label2>,...]
[Color=<red|green|blue|orange|purple>]
Options
quiet
This option suppresses user confirmation prompts. This option is useful
when scripting operations.
Properties
UplinkSet (required)
The name of an existing shared uplink port set to use with the new