User's Manual

Introduction 7
• Enhanced the following commands to display the configured boot mode or boot order:
o show profile ("profile" on page 88)
o show server ("server" on page 106)
o show enet-connection ("enet-connection" on page 33)
Changes from VC 4.20 to VC 4.30/4.31
Command Changes Virtual Connect 4.20 Virtual Connect
4.30/4.31
add snmp-user
set snmp-user
show snmp-user
remove snmp-user
help snmp-user
The new managed
elements configure
SNMP users.
Not supported Supported
set stackinglink
The element configures
the stacking link mode
for the domain.
Not supported Supported
add snmp
set snmp
The element properties
are enhanced to
support SNMPv3.
SNMPv3 not supported Added the following
properties:
[EnableV1V2=<true|
false>]
[EnableV3=<true|fa
lse>]
set snmp-trap
add snmp-trap
The element properties
are enhanced to
support SNMPv3.
SNMPv3 not supported Added the following
properties:
[Port=<1-65535>]
[Format=<SNMPv1|SN
MPv2|SNMPv3>][User
Name=<SNMPv3
username>]
[EngineId=<EngineI
d>][SecurityLevel=
<NOAUTHNOPRIV|AUTH
NOPRIV|AUTHPRIV>][
Inform=<true|false
>]
enet-vlan
The element property
VlanCapacity is
enhanced to support
8192 VLANs in the
domain and 4094
networks per SUS.
"Expanded" mode
allows up to 1000
VLANs per domain and
162 VLANs per physical
server port.
"Expanded" mode allows
up to 8192 VLANs per
domain and 162 VLANs
per physical server port.
show stackinglink
show config
The commands are
enhanced to display the
status or configuration
of domain stacking
links.
Stacking mode is not
displayed.
Stacking mode is Full,
Horizontal, or
Primary-Slice.
add uplinkport
add port monitor
add sflow-ports
The commands are
enhanced to provide
warning or notice when
configuring ports that
are controlled by the
domain stacking link.
Warning or notice is not
provided.
Warning or notice is
provided.