User's Manual

Command line 68
Item Description
information for all remote log destinations.
Example
->show log-target
Displays all log destination settings
Item Description
test log-target
Send a test message to all enabled remote log destinations.
Syntax
test log-target
Example
->test log-target
Sends a test message all log-targets
loop-protect
The loop-protect command is deprecated in 4.00. HP recommends using the port-protect command. For
information about port-protect settings, see "port-protect (on page 87)."
Manage loop protection settings.
Supported actions: help, reset, set, show
Item Description
reset loop-protect
Reset and restart loop detection for all server ports in a “loop-detected” error
condition.
Syntax
reset loop-protect
Example
->reset loop-protect
Resets and restarts loop detection for all server ports in a “loop-detected” error
condition
Item Description
set loop-protect
Configure the loop protection settings.
Syntax
set loop-protect [-quiet] Enabled=<true|false>
Option
quiet (optional)
Suppresses user confirmation prompts
Properties
Enabled (required)
Enables or disables network loop detection and protection. Valid values include
"true" and "false".
Example
->set loop-protect Enabled=true
Enables loop protection
Item Description
show loop-protect
Display the loop protection configuration and all Ethernet ports currently disabled
due to protection enforcement.
Syntax
show loop-protect
Example