User's Manual

Command line 64
Supported actions: help, set, show
Item Description
set
link-dist-interval
Set the FC login re-distribution interval for uplinks that are part of a fabric
configured for Automatic login re-distribution.
Syntax
set link-dist-interval Interval=<1-1800>
Property
Interval (required)
FC login re-distribution interval for uplinks (in seconds). Valid values include
positive integers in the range 1 to 1800. The default is 30 seconds.
Example
->set link-dist-interval interval=10
Sets the FC login re-distribution interval to 10 seconds
Item Description
show
link-dist-interval
Display the FC login re-distribution interval for uplinks that are part of a fabric
configured for Automatic login redistribution.
Syntax
show link-dist-interval
Example
->show link-dist-interval
Displays the FC login re-distribution interval
lldp
Configure and display LLDP information received on a specified port.
Supported actions: set, show, help
Item Description
set lldp
Sets LLDP configuration for lldp on external uplink
ports.
Syntax
show lldp enhancedTlv=<true|false>
Parameter
enhancedTlv
(required)
Configures the TLV structure. Valid values are 'true' and 'false'. Modifying this
parameter impacts any service that queries this information for network topology
information.
Configuring to true enables the enhanced TLV format:
•
System Name (<hostname><serial_number>BAY:<bay_number>)
•
Chassis ID (ENC:<enclosure_name>:SERIAL
NO:<enclosure_serial_number>)
•
Port Description (<op_speed>/<connector_type>)
Configuring to false enables the default format:
•
System Name (<hostname>)
•
Chassis ID (<switch_mac_address>)
•
Port Description (IF-MIB::ifDesc value), for example (HP VC FlexFabric
10Gb/24-Port Module 4.10 X1)
Example
->set lldp enhancedTlv=true
Modifies the LLDP enhanced TLV configuration setting for LLDP on external uplink