User's Manual

Command line 48
Item Description
->add fcoe-connection MyNewProfile
WWNAddressType=Factory-Default
Adds a new FCoE connection and uses factory-default WWN addresses
->add fcoe-connection MyNewProfile
WWNAddressType=User-Defined
PortWWN=50:06:0B:00:00:C2:62:00
NodeWWN=50:06:0B:00:00:C2:62:01
Adds a new FCoE connection and provides user-defined WWN addresses
->add fcoe-connection MyNewProfile
WWNAddressType=Pool-Specified
PortWWN=50:06:0B:00:00:C2:62:00
NodeWWN=50:06:0B:00:00:C2:62:01
Adds a new FCoE connection and provides WWN addresses from the
VC-defined or user-defined pool
->add fcoe-connection MyNewProfile
MACAddressType=Factory-Default
Adds a new FCoE connection and uses factory-default MAC addresses
->add fcoe-connection MyNewProfile
MACAddressType=User-Defined
EthernetMAC=00-17-A4-77-00-00
Adds a new FCoE connection and provides a user-defined MAC address
->add fcoe-connection MyNewProfile
MACAddressType=Pool-Specified
EthernetMAC=00-17-A4-77-00-00
Adds a new FCoE connection and provides a MAC address from the
VC-defined or user-defined pool
->add fcoe-connection MyProfile Fabric=MyFabric
SpeedType=Preferred
Adds a new FCoE connection and sets the speed type to "Preferred"
->add fcoe-connection MyProfile Fabric=MyFabric
SpeedType=Preferred
Adds a new FCoE connection and set the speed type to "Preferred"
Item Description
remove fcoe-connection
Remove the last FCoE connection from an existing server profile.
Syntax
remove fcoe-connection <ProfileName>
Parameter
ProfileName (required)
The name of an existing profile from which the last FCoE connection is being
removed
Example
->remove fcoe-connection MyProfile
Removes an FCoE connection from a profile
Item Description
set fcoe-connection
Modify an existing FCoE connection.
Syntax
set fcoe-connection <ConnectionID>
[Fabric=<FabricName>|FcoeNetwork=<FcoeNetName>]
[SpeedType=<1Gb|2Gb|4Gb|8Gb|Auto|Custom|Preferred|Disabl
ed>] [CustomSpeed=<100Mb-8Gb|20Gb>]
[BootPriority=<priority>] [BootPort=<portName>]
[BootLun=<LUN>]
Parameters
ConnectionID
The ID of an existing FCoE connection. The format of the ID must be