User's Manual

Command line 40
Item Description
->set external-manager UserName=A17005068 Enabled=false
Disables the external manager
->set external-manager UserName=A17005068 Enabled=true
Enables the external manager
Item Description
show
external-manager
Display the information of an existing external manager.
Syntax
show external-manager
Example
->show external-manager
Displays the information of an existing external manager
fabric
Manage Fibre Channel SAN fabrics.
Supported actions: add, help, remove, set, show
Item Description
add fabric
Add a new fabric to the domain. If the QoS type for the domain is set to
"CustomNoFcoe", then the fabric cannot include FCoE ports. If it does, the message
"cannot add fabric when QoS configuration type is CustomNoFCoE" appears. For
more information about setting the QoS type, see "qos (on page 97)."
Syntax
add fabric <Name> Bay=<BayNum> Ports=<PortList>
[Type=<FabricAttach|DirectAttach>] [Speed=<Auto|2Gb|4Gb|8Gb>]
[LinkDist=<Auto|Manual>][PrefSpeedType=<Auto|Custom>]
[PrefSpeed=<100Mb-8Gb in 100Mb
steps>][MaxSpeedType=<UnRestricted|Custom>]
[MaxSpeed=<100Mb-8Gb in 100Mb steps>]
Parameter
Name (required)
A unique name is required when new fabric is added to the domain.
Properties
Bay (required)
The specific interconnect bay number with which the fabric is associated.
Ports (required)
A list of one or more logical FC ports to be added to the fabric.
Each port is specified in the format "<port1>,<port2>,...", where "port" is the
interconnect module port number to be added to the fabric, for example "1, 2, 3, 4"
(affects all modules within a bay group).
•
For HP VC FlexFabric 10Gb/24-port Modules, port numbers 1, 2, 3, and 4
correspond to ports X1, X2, X3, and X4, respectively.
•
For HP VC FlexFabric-20/40 F8 Modules, port numbers 1, 2, 3, 4, 5, 6, 7, and 8
correspond to ports X1, X2, X3, X4, X5, X6, X7, and X8, respectively. Ports X1
through X4 support Ethernet and Fibre Channel traffic. Port pairs X5/X6 and
X7/X8 carry a single type of network traffic, either Ethernet or Fibre Channel.
Type (optional)
The fabric type. "FabricAttach" is a SAN fabric. A "DirectAttach" fabric is directly
connected to a supported storage device. A "DirectAttach" fabric is only allowed for a
FlexFabric module. The default type is "FabricAttach".