User's Manual

Command line 37
Item Description
->show enet-connection *
Displays all Ethernet connections in the domain
->show enet-connection Profile1:*
Displays all Ethernet connections of a profile named Profile1
->show enet-connection Profile1:1
Displays a specific Ethernet connection of a profile named Profile1
enet-vlan
Manage Ethernet VLAN configuration settings.
Supported actions: help, set, show
Item Description
set enet-vlan
Modify general Ethernet VLAN configuration settings.
Syntax
set enet-vlan [-quiet][SharedServerVLanId=<true|false>]
[PrefSpeedType=<Auto|Custom>] [PrefSpeed=<speed>]
[MaxSpeedType=<Unrestricted|Custom>] [MaxSpeed=<speed>]
[VlanCapacity=<Legacy|Expanded>]
Option
quiet
This option suppresses the user confirmation prompt and is typically used in
automated scripting scenarios.
Properties
SharedServerVLanId
(optional)
Enables or disables the option to force server ports connected to multiple VC
Ethernet networks to use the same VLAN mappings as those used by
corresponding shared uplink sets. Valid values are "true" and "false".
Setting the value to "true" restricts the server network connections to be selected
from a single shared uplink, and the VLAN ID cannot be modified.
Setting the value to "false" enables you to select any VC Ethernet network for the
server Ethernet connections, and VLAN ID mappings can be modified to ensure
uniqueness.
PrefSpeedType
(optional)
The default connection speed for any Ethernet connection using multiple
networks. Valid values are "Auto" and "Custom". "Custom" enables you to
configure the preferred speed. The default value is "Auto".
PrefSpeed (required if
PrefSpeedType is
Custom)
The default connection speed for any Ethernet connection using multiple
networks. Valid values range from 100Mb to 20Gb in 100Mb increments.
The 20Gb maximum speed is dependent on 20Gb NICs and the HP VC
FlexFabric-20/40 F8 Module being present in the domain.
MaxSpeedType
(optional)
The maximum connection speed for any Ethernet connection using multiple
networks. Valid values are "Unrestricted" and "Custom". "Custom" enables you
to configure the preferred speed. The default value is "Unrestricted".
MaxSpeed (required if
MaxSpeedType is
Custom)
The maximum connection speed for any Ethernet connection using multiple
networks. Valid values range from 100Mb to 20Gb in 100Mb increments.
The 20Gb maximum speed is dependent on 20Gb NICs and the HP VC
FlexFabric-20/40 F8 Module being present in the domain.
VlanCapacity
(optional)
The VLAN capacity mode. Valid values are "Legacy" and "Expanded". The
default value is "Legacy".
"Legacy" mode allows up to 320 VLANs per module and 28 VLANs per server
connection.
"Expanded" mode allows up to 8192 VLANs per domain and 162 VLANs per
physical server port.