User's Manual

Command line 33
Item Description
(optional)
appear.
Examples
->show enclosure
Displays a summary of all enclosures
->show enclosure *
Displays detailed information for all enclosures
->show enclosure enc0
Displays detailed information for a specific enclosure
enet-connection
Manage Ethernet network connections.
Supported actions: add, help, remove, set, show
Item Description
add enet-connection
Add a new Ethernet network connection to an existing server profile.
The maximum number of Ethernet connections that can be added to a
server profile is 128.
Syntax
add enet-connection <ProfileName>
[Network=<NetworkName>][McastFilter=<McastFilterName
>|McastFilterSet=<McastFilterSetName>]
[PXE=<enabled|disabled|UseBios>]
[pxeBootOrder=<Auto|IPv4Only|IPv6Only|IPv4ThenIPv6|I
Pv6ThenIPv4>]
[AddressType=<Factory-Default|User-Defined|Pool-Spec
ified>] [EthernetMAC=<MAC Address> iScsiMAC=<MAC
Address>] [SpeedType=<Auto|Preferred|Custom|
Disabled>] [Speed=<speed>]
Parameter
ProfileName (required)
The name of an existing profile to which the new connection is added
Properties
Network (optional)
The name of an existing network to associate with the connection. If the
network name is not specified, or is set to "unassigned", the network
remains unassigned and can be assigned later.
PXE (optional)
Enables or disables PXE on the network connection. Valid values are
"enabled", "disabled", and "UseBios". If not specified, the default is
"UseBios".
Only one connection can have PXE enabled per profile.
pxeBootOrder (optional)
Modifies the PXE IP boot order. The default setting is 'Auto'. Valid values
are:
•
Auto
•
IPv4Only
•
IPv6Only
•
IPv4ThenIPv6
•
IPv6ThenIPv4
McastFilter (optional)
The name of an existing Multicast Filter to associate with the connection if
the Multicast Filter name has not been specified. If the name is not
specified, or is set to "None", then the Multicast Filter is left unassigned
and can be assigned later.
McastFilterSet (optional)
The name of an existing Multicast Filter Set to associate with the