User's Manual

Configuring the Virtual Connect domain using the CLI 179
To remove all local users except for the Administrator account:
>remove user *
To display local user information:
• Summary of all users
>show user
• Details for all users
>show user *
• Details for a single user
>show user steve
Up to 32 local user accounts can be created.
Each user account can be set up to have a combination of up to four access roles. For a list of commands that
each role can execute, see "User roles (on page 149)."
• Domain
o Define local user accounts, set passwords, define roles
o Configure role-based user authentication
o Import enclosures
o Name the VC domain
o Set the domain IP address
o Update firmware
o Administer SSL certificates
o Delete the VC domain
o Save configuration to disk
o Restore the configuration from a backup
o Configure SNMP settings
• Network
o Configure network default settings
o Select the MAC address range to be used by the VC domain
o Create, delete, and edit networks
o Create, delete, and edit shared uplink sets
o Create, delete, and edit network access groups
o Configure Ethernet SNMP settings
• Server
o Create, delete, and edit server Virtual Connect profiles
o Assign and unassign profiles to device bays
o Select and use available networks
o Select serial numbers and UUIDs to be used by server profiles
o Power on and off server blades within the enclosure
• Storage
o Select the WWNs to be used by the domain