User's Manual

Command line 172
FRAMESTOOLONG
Object type
connUnitPortStatCountFramesTooLong
Description
The number of frames received at this port where the frame length was greater than
what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of frame
delimiter.
::= { connUnitPortStatEntry 46 }
FRAMESTRANSMITTED
Object type
connUnitPortStatCountTxObjects
Description
The number of frames, packets, IOs, and so on that have been transmitted by this port.
A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should not
count frames passing through. This value represents the sum total for all other Tx
objects.
::= { connUnitPortStatEntry 4 }
FRJTFRAMES
Object type
connUnitPortStatCountFRJTFrames
Description
The number of times that FRJT was returned to this port as a result of a frame being
rejected by the fabric. The count is the total for all classes.
::= { connUnitPortStatEntry 12 }
INPUTBUFFERSFULL
Object type
connUnitPortStatCountInputBuffersFull
Description
The number of times that all input buffers of a port were full and the outbound
buffer-to-buffer credit transitioned to zero. There is no credit to provide to the other side.
::= { connUnitPortStatEntry 9 }
INVALIDORDEREDSETS
Object type
connUnitPortStatCountInvalidOrderedSets
Description
The number of invalid ordered sets received at a port. This count is part of FC-PH's
LESB.
::= { connUnitPortStatEntry 45 }
INVALIDTRANSMISSIONWORDS
Object type
connUnitPortStatCountInvalidTxWords
Description
The number of invalid transmission words received at this port. This number is part of
FC-PH's LESB.
::= { connUnitPortStatEntry 41 }
LINKFAILURES
Object type
connUnitPortStatCountLinkFailures
Description
The number of link failures. This number is part of FC-PH's LESB.
::= { connUnitPortStatEntry 39 }
LINKRESETRECEIVED
Object type
connUnitPortStatCountRxLinkResets