User's Manual

Command line 146
Item Description
->show user-security
Displays user security settings
user-security
Manage local user security settings.
Supported actions: help, set, show
Item Description
set user-security
Modify domain user security settings and enforce additional security requirements
for user passwords.
Syntax
set user-security [StrongPasswords=<Enabled|Disabled>]
[MinPasswordLength=<3-40>]
Properties
StrongPasswords
(optional)
Enables or disables strong password enforcement. If enabled, then new, local users
that are created are validated against the password characteristics specified. Valid
values include: "Enabled" and "Disabled".
When the domain is in FIPS mode, the password strength cannot be changed.
MinPasswordLength
(optional)
The minimum password length allowed for new passwords when adding a new
user and when changing an existing password. The default value is 8.
When the domain is in FIPS mode, the password length cannot be less than 8
characters.
Examples
->set user-security StrongPasswords=Enabled
Enables strong user password enforcement
->set user-security StrongPasswords=Disabled
Disables strong user password enforcement
->set user-security MinPasswordLength=10
Modifies the minimum password length
Item Description
show user-security
Display general domain user security settings.
Syntax
show user-security
Example
->show user-security
Displays user security settings
user
IMPORTANT: Role operations assigned to users with Server role permissions are not available
when the VC domain is under VCEM control.
Manage local domain user configurations.
Supported actions: add, help, remove, set, show
Item Description
add user
Create a new user and add the user to the Virtual Connect Manager database.
Syntax
add user <UserName> Password=<password> [FullName=<Full