User's Manual

Command line 141
Item Description
->add uplinkport enc0:1:Q1.1 Uplinkset=MyUplinkSet Speed=40Gb
Adds a new QSFP+ uplink port (Bay 1, Port Q1.1) to a shared uplink set with a port
speed set to 40Gb
Item Description
remove uplinkport
Remove an uplink port element from a network or a shared uplink port set.
Syntax
remove uplinkport <PortID> [Network=<NetworkName> |
UplinkSet=<UplinkSetName>]
Parameter
PortID (required)
The ID of the port to remove from a network. The specified port must already be added
to a network or uplink port set.
•
If the uplinkset does not contain an FCoE network, the port ID uses the format
<EnclosureID>:<InterconnectBay>:<PortNumber>
•
If the uplinkset contains an FCoE network, the port ID uses the format
<InterconnectBay>:<PortNumber>
The uplink port is configured for all enclosures.
For QSFP+ ports, the
<PortNumber>
format is
Q<x>.<y>
.
Properties
Network
(required)
The name of the network from which the port is removed if the UplinkSet name is not
specified
UplinkSet
(required)
The name of the shared uplink set from which the port is removed if the Network name
is not specified
Examples
->remove uplinkport enc0:1:X2 Network=MyNetwork
Removes a specific uplink port (Bay 1, Port 2) from a network named MyNetwork
->remove uplinkport * Network=BlueNetwork
Removes all uplink ports from a network named BlueNetwork
->remove uplinkport enc0:2:X3 UplinkSet=SharedUplinkSet1
Removes a specific uplink port (Bay 2, Port 3) from a shared uplink set
->remove uplinkport 1:X1 UplinkSet=MyUplinkSet
Removes a specific uplink port (Bay 1, Port 1) from a shared uplink set that contains an
FCoE network (affects all modules within a bay group)
->remove uplinkport enc0:1:Q1.1 Network=MyNetwork
Removes a specific QSFP+ uplink port (Bay 1, Port Q1.1) from a network named
MyNetwork
Item Description
set uplinkport
Modify an uplink port that exists as a member of a network or shared uplink port set.
Syntax
set uplinkport <PortID> [Network=<NetworkName>|
UplinkSet=<UplinkSetName>][Speed=<Auto|10Mb|100Mb|1Gb|10Gb|40
Gb|Disabled>] [Role=<Primary|Secondary>]
Parameter
PortID (required)
The ID of the port to modify. The specified port must already be added to a network or
shared uplink set.
•
If the uplinkset does not contain an FCoE network, the port ID uses the format
<EnclosureID>:<InterconnectBay>:<PortNumber>
•
If the uplinkset contains an FCoE network, the port ID uses the format
<InterconnectBay>:<PortNumber>
The uplink port is configured for all enclosures.
For QSFP+ ports, the
<PortNumber>
format is
Q<x>.<y>
.
Properties