User's Manual

Command line 134
Item Description
show statistics-
throughput
Display throughput information for the specified physical port, FlexNIC, and the
aggregated throughput information for the specified LAG.
Syntax
show statistics-throughput <config|PortID>
[LAGID=<encXX:BayNumber:lagNN>]
Parameters
PortID (optional)
The port ID of the port/subport for which to display throughput information. PortID is
composed of
<EnclosureID>:<BayNumber>:<PortLabel>[:<SubportLabel>]. For
QSFP+ ports, the <PortLabel> format is Q<x>.<y>. Port throughput collection must
be enabled for the domain by issuing the set statistics-throughput
command. A column that contains an "R" indicates that the statistics were reset by the
user during that time period; therefore, the throughput is not available for that time
period.
config (required
if PortID is not
specified)
Displays the current configuration of throughput statistics
Property
LAGID (optional)
The LAG ID on which to display throughput information. The LAG ID is in the format
<EnclosureID>:<BayNumber>:<LagLabel>. LagLabel is in the format
lagNN, where NN is the LAG number.
A listing of the possible uplink port IDs can be obtained by using the show
uplinkport
command.
Examples
->show statistics-throughput enc0:1:X1
Displays the port throughput statistics for port X1 of the module in bay1 of enclosure
enc0
->show statistics-throughput enc0:1:Q1.1
Displays the port throughput statistics for QSFP+ port Q1.1 of the module in bay 1 of
enclosure enc0
->show statistics-throughput enc0:1:d1:v1
Displays the subport throughput statistics for subport v1 of port d1 from the module in
bay1 of enclosure enc0
->show statistics-throughput config
Displays the current configuration of the throughput statistics
->show statistics-throughput LAGID=enc0:1:lag25
Displays the aggregated throughput statistics based on the LAGID 25 for the module in
bay1 of enclosure enc0
Item Description
set statistics-
throughput
Enable or disable the port throughput statistics and set the sample rate.
Syntax
set statistics-throughput <Enabled=[true|false]>
[SampleRate=<1m|2m|3m|4m|5m|1h>]>
Parameters
Enabled
(optional)
Enables or disables port throughput statistics. Valid values include "true" and "false".
SampleRate
(optional)
Configures the sample rate for statistics collection. Valid values include:
•
Use SampleRate=1m for 1 minute samples, collecting up to 5 hours of samples.
•
Use SampleRate=2m for 2 minute samples, collecting up to 10 hours of samples.
•
Use
SampleRate=3m
for 3 minute samples, collecting up to 15 hours of samples.