User's Manual

Command line 133
Item Description
cosq<N>_ucast_OutBytes
The accumulated transmitted byte count of unicast packets of the queue for
the specified port. For VC FlexFabric 10Gb/24-port module and VC
Flex-10 Enet module, the counter is not supported and the value is 0.
cosq<N>_ucast_OutPkts
The accumulated transmitted packet count of unicast packets of the queue
for the specified port. For VC FlexFabric 10Gb/24-port module and VC
Flex-10 Enet module, the counter includes both unicast and multicast data.
cosq<N>_ucast_DroppedPkts
The accumul
ated dropped packet count of unicast packet of the queue for
the specified port. For VC FlexFabric 10Gb/24-port module and VC
Flex-10 Enet module, the counter includes unicast and multicast data.
DCBX is the data center discovery and capability exchange protocol used by DCB devices to exchange
configuration information with directly-connected peers. The protocol can also be used for misconfiguration
detection and for configuration of the peer. In this release, the VC module adopts the DCBX specification to
implement the control state machine and three feature state machines:
• Priority Group (PG)
• Priority-based Flow Control (PFC)
• Application Protocol (AP)
The following table lists the type of DCBX statistics displayed.
Item Description
DCBX Application Protocol State
<enabled or disabled>
DCBX Overall Status
<OK, Failed, Unknown>
DCBX Pending Status
<false, true, or negotiating in progress>
DCBX Priority Flow Control State
<Status>
DCBX Priority Group State
<Status>
DCBX Application Protocol State
<Status>
The following table defines each statistic.
Item Description
disabled
The feature is operationally disabled.
ok
The feature is configured properly or DCBX negotiation is in progress.
incompatible cnfg
A FlexFabric network adapter has an incompatible configuration and is not
accepting changes.
peer_disabled
A FlexFabric network adapter reports that the feature is not enabled.
Does not support dcbx
A FlexFabric network adapter does not indicate that it supports the feature.
Not advertising dcbx support
A FlexFabric network adapter is not running DCBX within the expired
period.
Error during cnfg
A FlexFabric network adapter reported an error configuring the feature.
Not accepting changes
A FlexFabric network adapter reported an error configuring the feature.
statistics-throughput
Manage the port throughput statistics.
Supported actions: help, show, set