User's Manual

Command line 132
Item Description
show statistics
Display statistics for the specified physical port, FlexNIC, or the aggregated statistics
for the specified LAG.
Syntax
show statistics <PortID> | <[-summary]
<LAGID=<encXX:BayNumber:lagNN> |
PortID=<encXX:BayNumber:portlabel>>>
Parameter
PortID (optional)
The port ID on which to display statistics information. The port ID is in the format:
•
Uplink port—<EnclosureID>:<BayNumber>:<PortLabel>
•
Downlink port—<EnclosureID>:<BayNumber>:<PortLabel>:
[<SubPortLabel>]
SubPortLabel for a downlink port is optional.
For QSFP+ ports, the <PortLabel> format is Q<x>.<y>.
A listing of the possible uplink port IDs can be obtained by using the show
uplinkport
command.
Option
summary
Displays a per port summary for the members of the specified LAG
Properties
LAGID (optional)
The LAG ID on which to display statistics information. The LAG ID is in the format
<EnclosureID>:<BayNumber>:<LagLabel>. LagLabel must be in the format
lagNN
, where
NN
is the LAG number.
PortID (optional)
The ID of the port on which to display statistics information. The port ID is in the format
<EnclosureID>:<BayNumber>:<PortLabel>
.
Examples
->show statistics enc0:3:X1
Displays statistics for uplink port X1 on interconnect module 3 of the primary enclosure
->show statistics enc0:1:Q1.1
Displays statistics for QSFP+ uplink port Q1.1 on interconnect module 1 of the primary
enclosure
->show statistics enc0:1:d3
Displays statistics for downlink port d3 on Ethernet interconnect module 1 of the
primary enclosure
->show statistics enc0:1:d1:v1
Displays statistics for subport v1 of downlink port d1 on Ethernet interconnect module
1 of the primary enclosure
->show statistics PortID=enc0:1:X1
Displays statistics for uplink port X1 on interconnect module 1 of the primary enclosure
->show statistics -summary LAGID=enc0:1:lag25
Displays aggregated statistics with selected counters for a given LAG ID on
interconnect module 1 of the primary enclosure
->show statistics LAGID=enc0:1:lag25
Displays aggregated statistics for a given LAG ID on interconnect module 1 of the
primary enclosure
In addition to the standard statistics, Virtual Connect also provides additional information on DCBX and QoS.
The QoS statistics are displayed for the specified physical port. The types of QoS statistics are in the format
of cosq<N>_<counter>, where <N> is the queue number with values 0-7. The queue number N is based
on the egress dot1p priority of the corresponding QoS traffic class. When QoS is not enabled, cosq3 is for
FCoE traffic and cosq0 is for regular Ethernet traffic.
The following table lists the types of QoS statistics displayed.