User's Manual

Command line 131
Item Description
Options
quiet
This option suppresses user confirmation prompts. This option is useful when
scripting operations.
Property
DomainStackingMode
(required)
Specifies one of three stacking modes for the domain:
•
Full—Default stacking mode. All FlexFabric and Ethernet modules are
interconnected.
•
Horizontal—Disables all vertical stacking links.
•
Primary-Slice—Disables all stacking links outside of the primary slice.
The primary slice is the primary and standby interconnect modules for the
enclosure.
Example
->set stackinglink DomainStackingMode=Primary-Slice
Configures the primary slice stacking mode.
Item Description
show stackinglink
Display the status, stacking mode, and summary information of stacking
links.
Syntax
show stackinglink
Example
->show stackinglink
Displays the status, stacking mode, and summary information of stacking
links.
statistics
Manage statistics for interconnect module ports.
Supported actions: help, reset, show
Item Description
reset statistics
Reset per-port statistics for the specified port ID and its associated subports.
Syntax
reset statistics <PortID>
Parameter
PortID (required)
The port ID on which to reset statistics. The port ID is in the format
<EnclosureID>:<BayNumber>:<PortLabel>. For QSFP+ ports, the
<PortLabel> format is Q<x>.<y>.
A listing of the possible uplink port IDs can be obtained by using the show
uplinkport
command.
Examples
->reset statistics enc0:3:X1
Resets the statistics for uplink port X1 on the interconnect module in bay 3 of the local
enclosure
->reset statistics enc0:1:Q1.1
Resets the statistics for QSFP+ uplink port Q1.1 on the interconnect module in bay 1 of
the local enclosure
->reset statistics enc0:1:d3
Resets statistics for downlink port d3 on the Ethernet interconnect module in bay 1 of the
local enclosure