Technical data

Additional Installation Issues
This section describes issues that are related to the installation of the Solaris OS.
smosservice add Command Does Not Install
Designated ARCH=all Packages (4871256)
The smosservice add command does not install any packages that are designated ARCH=all in
the root (/) or /usr le systems. There is no error message indicating these packages were
skipped. This problem exists in all Solaris OS versions, and applies to both SPARC based and
x86 based clients.
Note that the list of missing packages varies, depending on the Solaris release that you are
running.
Workaround: Locate and install the missing ARCH=all packages.
For step-by-step instructions on locating and installing missing packages, see
“How to Locate
and Install Missing ARCH=all Packages” in System Administration Guide: Basic
Administration
.
StarOce and StarSuite Software Cannot Coexist in
the Same System
When you install Solaris 10 OS, either the StarOce or the StarSuite software is also
automatically installed, depending on which language you select. The languages and the
corresponding software that these languages support are listed as follows:
Selected Language Supported Software
Chinese, Japanese, Korean StarSuite
Other languages StarOce
StarOce and StarSuite cannot coexist in the same system. If you want to replace a software
that you accidentally installed, follow these steps.
1. Insert the Solaris 10 Software - 4 CD or Solaris 10 Operating System DVD in the drive.
2. Become superuser.
3. Change to the Product directory, for example, /cdrom/cdrom0/Solaris_10/Product.
4. Replace the software.
Additional Installation Issues
Chapter 1 • Installation Issues 51