Installation guide

ncp-threads-per-core=6;
USB Floppy Drive Fails to Mount (6650724)
Floppy disks are not automatically mounted when inserted into USB oppy drives. No error
message is displayed. The pcfs le system on the oppy disk is not accessible.
Workaround: The le system on the oppy disk can be mounted manually by running the
mount command. For example:
mount -F pcfs /vol/dev/dsk/c3t0d0/noname /rmdisk
Error Message Is Displayed When Disconnecting USB
Storage Devices (6624786)
The following error message is displayed when a USB storage device is disconnected:
Disconnected device was busy, please reconnect.
This message is displayed even when the device is unmounted successfully.
Workaround: None. The error message can be safely ignored.
The (ZFS) ARC Allocates Memory Inside The Kernel
Cage Preventing DR (6522017)
ZFS can potentially allocate kernel memory across all system boards on systems with very large
memory congurations. One free system board is required for dynamic memory
reconguration so that the memory from the board to be dynamically recongured can be
copied to the free board. The dynamic memory reconguration means that you cannot
dynamically recongure memory on systems with very large memory congurations that have
ZFS running. High-end SunFire
TM
servers can relocate kernel pages so that this issue is avoided.
These servers must have kernel page relocation (KPR) enabled for domains with more than 32
cores. No error message is displayed
Workaround: Reduce the amount of kernel memory that ZFS can allocate by setting the
zfs_arc_max parameter in the /etc/system le. The following example sets the maximum size
to 512 Mbytes.
set zfs_arc_max = 0x20000000
Hardware–Related Issues and Bugs
Solaris 10 10/09 Release Notes • October 200970