Installation Guide

Chapter 5. SIP Configuration
Server
Enter the host name, domain name, or IP address of the server to be monitored.
Port
Enter the port to be monitored on that host. This should be the port to use for SIP signaling.
Transport
Select the transport to be monitored on that host. This should be the transport to use for SIP signaling.
Delete Row
If you select this box, the row is deleted when you click on Add new rows or Save.
Create
Enter the number of new rows you want to add to the table, and then click on Create.
Logging
The same settings can also be found on the Logging Configuration page under Logging.
Log class for SIP errors
The Telecommuting Module sends a message if there are any SIP errors. Select a log class for these log messages.
Log class for SIP signaling
For each SIP packet, the Telecommuting Module generates a message, containing the sender and receiver of the
packet and what type of packet it is. Select a log class for these log messages.
27