Administrator's Guide

Chapter 4. How To Conﬁgure SIP

When the conﬁguration has been applied, you should save a backup to ﬁle. Press Save conﬁg

to CLI ﬁle to save the conﬁguration.

Client Settings

SIP clients will use the Telecommuting Module as their outgoing SIP proxy and the SIP

domain as the registrar.

LAN Telecommuting Module

For various reasons, you might want to use a separate SIP server instead of the built-in server

in the Telecommuting Module. That SIP server would be located on the inside or maybe on

a DMZ.

With the LAN Telecommuting Module, you connect the Telecommuting Module to a NATed

network.

Here are the settings needed for this. It is assumed that the Telecommuting Module already

has a network conﬁguration. Only the additional SIP settings are listed.

Networks and Computers

The Telecommuting Module must know the network structure to be able to function properly.

On the Networks and Computers page, you deﬁne all networks which the Telecommuting

Module should serve and which are not reached through the default gateway of the ﬁrewall.