Administrator's Guide

Chapter 4. How To Configure SIP
Save/Load Configuration
Finally, go to the Save/Load Configuration page under Administration and apply the new
settings by pressing Apply configuration.
When the configuration has been applied, you should save a backup to file. Press Save config
to CLI file to save the configuration.
Client Settings
SIP clients will use the Telecommuting Module as their outgoing SIP proxy and the SIP
domain as the registrar.
DMZ/LAN Telecommuting Module, SIP server
on the WAN
The simplest SIP scenario is when the SIP server is managed by someone else, and the
Telecommuting Module SIP function is only used to traverse NAT.
Note that the Telecommuting Module must have a public (non-NATed) IP address for the
SIP signaling to work correctly.
43