Administrator's Guide

Chapter 15. Command Line Reference
Selection Explanation
reject Reject the request.
forward Forward the request to listed users, not to the original user.
parallel Forward the request to the original user and all listed users.
sequence Forward the request to the original user, then to listed users in sequence.
random Forward the request to a randomly selected user among the listed and
original users. If there is no response a new user is selected to forward
the request to.
account_type_sel
A selection of SIP user account types.
Selection Explanation
user A standard SIP user.
reg A registration account. The Ingate registers the user with the server
managing that domain.
xf A forwarding account. The Ingate replaces the From header in the
incoming request with the username and domain of this user. The
request is then forwarded to the address entered in the
’db.sipswitch.dial_plan’ table.
xf+reg A combination of the ’xf’ and ’reg’ accounts.
domain An authentication account. When this account is used, the Ingate will
respond with authentication details to authentication requests from the
domain.
mr A B2BUA account. The Ingate replaces the From header as for an ’xf’
account. The SDPs are rewritten to make SIP media always go via the
Ingate.
mr+reg A combination of the ’mr’ and ’reg’ accounts.
account_voice_mail_sel
A selection of when to forward calls.
Selection Explanation
on Always.
after5 After 5 seconds.
after10 After 10 seconds.
after15 After 15 seconds.
after25 After 25 seconds.
busy When busy.
busy5 When busy or after 5 seconds.
busy10 When busy or after 10 seconds.
busy15 When busy or after 15 seconds.
307