Administrator's Guide

Chapter 3. Conﬁguring 3Com VCX IP Telecommuting Module

still being run by the permanent conﬁguration. You do this by selecting Abort all edits

on the Save/Load Conﬁguration page under Administration. This will discard all changes

made in the preliminary conﬁguration since last time you applied a conﬁguration by pressing

Save conﬁguration.

You can save the preliminary conﬁguration to a ﬁle on your work station (the computer that

is running your web browser). Select Save to local ﬁle or Save conﬁg to CLI ﬁle on the

Save/Load Conﬁguration page.

A saved conﬁguration can be loaded to the preliminary conﬁguration. Use Browse to search

your local computer or enter path and ﬁle name in the box. When you have chosen the ﬁle

you want to load, select Load from local ﬁle or Load CLI ﬁle on the Save/Load Conﬁgu-

ration page.

You can save the preliminary conﬁguration to a diskette. Insert a formatted diskette in the

Telecommuting Module’s ﬂoppy drive and press Save to diskette on the Save/Load Con-

ﬁguration page.

You can load a saved conﬁguration to the preliminary conﬁguration. Insert a diskette con-

taining the saved conﬁguration in the Telecommuting Module’s ﬂoppy drive and press Load

from diskette on the Save/Load Conﬁguration page.