Administrator's Guide

Chapter 15. Command Line Reference
Field Name Field Type Explanation
enabled OnOffToggle Turns the setting on or off.
sip.tls_cacerts
Corresponding setting in web GUI: TLS CA Certificates on page Signaling Encryption
Table type: Dynamic
List of CA certificates for TLS connections.
Field Name Field Type Explanation
ca CaReference A CA certificate.
sip.tls_client_cfg
Corresponding setting in web GUI: Making TLS Connections on page Signaling Encryption
Table type: Single row
Default settings for making TLS connections. Exceptions for certain IP addresses listed in
’db.sip.tls_server_cfg’.
Field Name Field Type Explanation
client_methods tls_client_methods The method to use for TLS connections
initiated by the Ingate.
default_cert OptCertReference The X.509 certificate to use for TLS
connections initiated by the Ingate.
sip.tls_server_cfg
Corresponding setting in web GUI: TLS Connections On Different IP Addresses on page
Signaling Encryption
Table type: Dynamic
List of IP addresses on which to accept TLS connections. For the listed IP addresses, the
corresponding certificate is also used when making TLS connections from this IP address.
Field Name Field Type Explanation
cert CertReference The certificate to use for TLS connections
on this IP address.
ip OwnIpReference An IP address for TLS connections.
require_client_certOnOffToggle Require that the client present a certificate.
server_methods tls_server_methods The methods to accept for connections to
this IP
sip.tls_settings
Corresponding setting in web GUI: Check server domain match on page Signaling Encryp-
tion
Table type: Single row
285