Administrator's Guide

Chapter 15. Command Line Reference
Table type: Single row
SIP blacklist interval. If no value is entered, blacklisting is not used.
Field Name Field Type Explanation
timeout OptionTimeout Blacklist interval (seconds).
sip.outbound_proxy
Corresponding setting in web GUI: Outbound Proxy on page Routing
Table type: Dynamic
Where to send SIP requests. Multiple outbound proxies can be used based on the domain in
the From header of the request.
Field Name Field Type Explanation
from_domain SipUserDomainDefaultAll Matches the domain part of the From
header.
to_domain UnresolvedReachableHost IP address or SIP domain to forward the
request to.
to_port OptPortNumber Port to forward the request to.
sip.percent20_to_whitespace
Corresponding setting in web GUI: Convert Escaped Whitespaces in URIs on page Interop-
erability
Table type: Single row
Turns the conversion of %20 to a real whitespace on and off in sipfw.
Field Name Field Type Explanation
enabled OnOffToggle Turns the setting on or off.
sip.preserve_2543_hold
Corresponding setting in web GUI: Preserve RFC 2543 Hold on page Interoperability
Table type: Single row
Perform Hold according to the old RFC2543.
Field Name Field Type Explanation
enabled OnOffToggle Turns the setting on or off.
sip.public_ip
Corresponding setting in web GUI: Public IP address for NATed Telecommuting Module on
page Basic Settings
Table type: Single row
The public IP for a NATed Ingate box. Used in SIP signaling.
278