Administrator's Guide

Chapter 15. Command Line Reference
sip.large_udp
Corresponding setting in web GUI: Allow Large UDP Packets on page Interoperability
Table type: Single row
Select to allow larger UDP packets than the standard allows, instead of switching to TCP
signaling.
Field Name Field Type Explanation
enabled OnOffToggle Turns the setting on or off.
sip.lcs_companion
Corresponding setting in web GUI: MEDIAtor on page MEDIAtor
Table type: Single row
Settings for the MEDIAtor.
Field Name Field Type Explanation
enabled OnOffToggle MEDIAtor function.
inside_ip OptOwnIpReference The MEDIAtor’s IP address on the LAN.
listen_ip OptOwnIpReference The IP address on which the MEDIAtor
should listen for connections from the
Access Proxy.
listen_port OptPortNumber The port on which the MEDIAtor should
listen for connections from the Access
Proxy.
outside_ip OptOwnIpReference The MEDIAtor’s IP address on the WAN.
sip.listen
Corresponding setting in web GUI: Additional SIP Signaling Ports on page Basic Settings
Table type: Dynamic
A list of additional ports for incoming SIP signaling to the Ingate.
Field Name Field Type Explanation
comment OptComment A comment field for the administrator.
port PortNumber The port on which to listen.
transport sip_transport_listen_sel The accepted SIP transports on this port.
sip.local_domains
Corresponding setting in web GUI: Local SIP Domains on page Local Registrar
Table type: Dynamic
The SIP domains that this Ingate should be registrar for.
Field Name Field Type Explanation
domain DomainName A SIP domain.
273