Administrator's Guide

Chapter 15. Command Line Reference
qos.ingress_queueing
Corresponding setting in web GUI: Classification on page QoS Interfaces
Table type: Dynamic
Assign priority and bandwidth for different types of traffic.
Field Name Field Type Explanation
cname QoSClassReference The traffic for which bandwidth is assigned
or limited.
interface InterfaceSel The interface for the outgoing traffic.
limit OptPercentFloat Bandwidth limit (kbit/s).
queue pqueue_sel Priority queue for the traffic.
rate OptPercentFloat Bandwidth assignment (kbit/s).
qos.sip_cac
Corresponding setting in web GUI: Call Admission Control, Codec Bandwidths on page
QoS and SIP
Table type: Single row
Call Admission Control settings.
Field Name Field Type Explanation
enabled OnOffToggle Use Call Admission control.
qos.status
Corresponding setting in web GUI: Type of QoS on page QoS Interfaces
Table type: Fixed
Global QoS settings.
Field Name Field Type Explanation
prio_save Percent Save this amount of bandwidth for lower
priority traffic.
type qostype_sel Type of QoS to use.
qos.tagging
Corresponding setting in web GUI: TOS/DSCP Modification on page TOS Modification
Table type: Dynamic
A list of traffic to mark up by setting the TOS or DSCP field.
Field Name Field Type Explanation
cname QoSClassReference The traffic to mark up.
dscp OptDSCPInteger Set the DSCP field.
tos opttos_sel Set the TOS field.
267