Administrator's Guide

Chapter 15. Command Line Reference
Field Name Field Type Explanation
lcp_echo_interval OptPositiveSysInteger Keep alive packet interval (seconds).
logclass FirewallLogclassReferenceThe log class to use for PPPoE negotiations.
password OptPassword The PPPoE password.
service OptNonWhiteString The PPPoE service.
user OptNonWhiteString The name of the PPPoE user.
network.route_test_servers
Corresponding setting in web GUI: Gateway Reference Hosts on page Default Gateway
Table type: Dynamic
A list of reference servers to use when determining if a default gateway is alive.
Field Name Field Type Explanation
server DnsIpAddress The reference server to use.
network.routes
Corresponding setting in web GUI: Main Default Gateways, Static Routing on pages Default
Gateway and Interface (Network Interface 1 and 2)
Table type: Dynamic
A list of static routes for networks not directly connected to the Ingate.
Field Name Field Type Explanation
destination RouteDestination The routed network.
gateway DnsDynIpAddress The router to use for this network.
interface InterfaceSel The interface where the router is located.
priority RoutePriority The priority of the gateway.
network.vlans
Corresponding setting in web GUI: Named VLANs on page VLAN
Table type: Dynamic
A list of VLANs used on the different interfaces.
Field Name Field Type Explanation
interface InterfaceSel The interface on which the VLAN is
defined.
name Name A name of the VLAN. It is used to refer to
this VLAN.
vlanid VlanId The id of this VLAN.
262