Administrator's Guide

Chapter 15. Command Line Reference
Field Name Field Type Explanation
address DnsIpAddress The IP address to use.
interface InterfaceSel The interface to which the network is
connected.
name Name A name for this IP address. It is used to
refer to the IP address.
network.interfaces
Corresponding setting in web GUI: General, Obtain IP Address Dynamically, Speed and
Duplex on pages Interface (Network Interface 1 and 2)
Table type: Fixed
Interface settings.
Field Name Field Type Explanation
autoneg autoneg_sel Set speed and duplex for the interface.
dynip dynip_client_sel Select how the IP address is acquired.
enabled OnOffToggle Enable the interface.
interface InterfaceSel The physical interface.
name Name A name for this interface.
network.local_nets
Corresponding setting in web GUI: Directly Connected Networks on pages Interface (Net-
work Interface 1 and 2)
Table type: Dynamic
A list of IP networks directly connected to the Ingate, and the Ingate’s IP addresses on these
networks.
Field Name Field Type Explanation
address DnsIpNetwork_Interface The IP address of the interface, and the
netmask of the network.
interface InterfaceSel The interface to which the network is
connected.
name Name A name for this IP address. It is used to
refer to the IP address.
vlanid OptVlanId The VLAN associated with the network.
network.pppoe
Corresponding setting in web GUI: PPPoE on page PPPoE
Table type: Single row
PPPoE settings.
261