Administrator's Guide

Chapter 15. Command Line Reference
Authentication for SNMP requests v3.
Field Name Field Type Explanation
authentication snmpv3_auth_sel Authentication algorithm used for this user.
password SnmpPassword The password for this user.
privacy snmpv3_privacy_sel Encryption algorithm used for this user.
user NonWhiteName A user allowed to make SNMP requests.
monitor.syslog_servers
Corresponding setting in web GUI: Syslog Servers on page Log Sending
Table type: Dynamic
A list of syslog servers where log messages should be sent.
Field Name Field Type Explanation
server DnsDynIpReachableHost A server name or IP address.
monitor.watchdogs
Corresponding setting in web GUI: Automatic Restart of the SIP Module on page Restart
Table type: Single row
Watchdog settings.
Field Name Field Type Explanation
enabled OnOffToggle Turns this watchdog on or off.
service NonWhiteName The service monitored.
network.alias_addresses
Corresponding setting in web GUI: Alias on pages Interface (Network Interface 1 and 2)
Table type: Dynamic
A list of extra Ingate IP addresses on the networks defined in the ’db.network.local_nets’
table.
Field Name Field Type Explanation
address DnsIpAddress The IP address to use.
interface InterfaceSel The interface to which the network is
connected.
name Name A name for this IP address. It is used to
refer to the IP address.
network.extra_default_gateways
Corresponding setting in web GUI: Additional Default Gateways on page Default Gateway
Table type: Dynamic
A list of extra Ingate IP addresses on the networks defined in the ’db.network.local_nets’
table.
260