Administrator's Guide

Chapter 15. Command Line Reference
Field Name Field Type Explanation
server OptDnsReachableHost A server name or IP address.
monitor.hardware_logclass
Corresponding setting in web GUI: Log class for hardware errors on page Logging Config-
uration
Table type: Single row
The log class for hardware errors.
Field Name Field Type Explanation
logclass LogclassReference A log class.
monitor.logclasses
Corresponding setting in web GUI: Log Classes on page Log Classes
Table type: Dynamic
A list of log classes used in the Ingate.
Field Name Field Type Explanation
email OptString Enter email address(es) which the log
message should be sent to.
facility syslogfacility_sel Select the syslog facility to use.
level sysloglevel_sel Select the syslog level to use.
local OnOffToggle Turn on or off logging to local disk/memory.
name Name The name of the log class. The name is used
when referring to this log class.
monitor.memory_level_alarm
Corresponding setting in web GUI: Memory Usage Trap Levels on page SNMP
Table type: Single row
When to create alarm messages for high memory usage.
Field Name Field Type Explanation
max_memory OptPercent The memory usage level when an alarm
message should be created and the alarm
state set.
ok_memory OptPercent The memory usage level when the alarm
state is reset.
monitor.radius_errors_logclass
Corresponding setting in web GUI: Log class for RADIUS errors on page Logging Config-
uration
256