Administrator's Guide

Chapter 15. Command Line Reference
Field Name Field Type Explanation
cert OptCertReference A certificate to use for this IP/port
combination.
ip OptOwnIpReference An IP address of this unit.
port PortNumber A port number of the IP address.
ipsec.tunneled_nets
Corresponding setting in web GUI: IPsec Tunnels on page IPsec Tunnels
Table type: Dynamic
Definitions of which networks can use each IPsec connection.
Field Name Field Type Explanation
ipsec_sa_life IpsecSALife IPsec key lifetime.
local_net OptIpsecNetReference The local network which can use the
connection.
local_type IpsecNetLocalSel The type of IP for which the IPsec
connection is negotiated and which can use
the connection.
nat_as_address OptOwnIpReference What address traffic through this tunnel
should be NAT:ed as, if set. The IPsec SA
will be negotiated for this address too,
instead of the specified local network.
peer IpsecPeer_Group The peer for which network definitions are
made.
remote_net OptIpsecNetReference The remote network which can use the
connection.
remote_type IpsecNetRemoteSel The type of IP for which the IPsec
connection is negotiated and which can use
the connection.
ipsec.userauth_logclass
Corresponding setting in web GUI: Log class for IPsec user authentications on pages IPsec
Settings and Logging Configuration
Table type: Single row
The log class for IPsec user authentications.
Field Name Field Type Explanation
logclass VPNLogclassReference A log class.
ipsec.x509_cacerts
Corresponding setting in web GUI: CA Certificates on page IPsec Certificates
Table type: Dynamic
Certificates for CAs which have signed IPsec peer certificates.
252