Administrator's Guide

Chapter 15. Command Line Reference
Table type: Dynamic
A list of IPsec peers for the Ingate.
Field Name Field Type Explanation
auth_type AuthtypeSel The authentication type for this peer.
enabled OptOnOffToggleOn Activate this peer.
isakmp_sa_life IsakmpSALife ISAKMP key lifetime.
local_addr OptOwnIpReference The Ingate’s IP address to which this peer
must connect.
name GroupName A name of the peer. It is used to refer to this
peer.
radius OptOnOffToggle Activate RADIUS authentication for a road
warrior peer.
remote_addr IpsecPeerAddr The peer’s IP address.
secret AuthData Authentication data for this peer.
subgroup SubGroup A reference to the ’name’ field. Used when
building a peer from multiple other peers.
ipsec.pluto_logclass
Corresponding setting in web GUI: Log class for IPsec key negotiations on pages IPsec
Settings and Logging Configuration
Table type: Single row
The log class for IPsec key negotiations.
Field Name Field Type Explanation
logclass VPNLogclassReference A log class.
ipsec.plutoverbose_logclass
Corresponding setting in web GUI: Log class for IPsec key negotiation debug messages on
pages IPsec Settings and Logging Configuration
Table type: Single row
The log class for verbose messages from IPsec key negotiations.
Field Name Field Type Explanation
logclass VPNLogclassReference A log class.
ipsec.radiusauth_server
Corresponding setting in web GUI: Authentication Server on page Authentication Server
Table type: Single row
The Ingate IP address and port to use for road warrior RADIUS authentication. A certificate
must also be selected.
251