Administrator's Guide

Chapter 15. Command Line Reference
Field Name Field Type Explanation
logclass VPNLogclassReference A log class.
ipsec.ike_logclass
Corresponding setting in web GUI: Log class for IKE and NAT-T packets on pages IPsec
Settings and Logging Configuration
Table type: Single row
The log class for IKE and NAT-T packets.
Field Name Field Type Explanation
logclass VPNLogclassReference A log class.
ipsec.ike_proposals
Corresponding setting in web GUI: IKE/ISAKMP (Phase 1) Encryption Proposals on page
IPsec Cryptos
Table type: Dynamic
Field Name Field Type Explanation
ipsec.ipsec_nets
Corresponding setting in web GUI: IPsec Networks on page IPsec Tunnels
Table type: Dynamic
A list of networks which will use IPsec connections.
Field Name Field Type Explanation
name Name A name of the network. It is used to refer to
this network.
network DnsIpNetwork_Filter The network to be tunneled through an
IPsec tunnel.
ipsec.nat_t_keepalive
Corresponding setting in web GUI: NAT Traversal (NAT-T) on page IPsec Settings
Table type: Single row
NAT-T keepalive settings.
Field Name Field Type Explanation
force OnOffToggle Force the Ingate to send keepalive packets.
interval Integer The interval between two keepalive packets
(seconds).
ipsec.peers
Corresponding setting in web GUI: IPsec Peers on page IPsec Peers
250