Administrator's Guide

Chapter 15. Command Line Reference
The log class for DHCP packets received by the Ingate.
Field Name Field Type Explanation
logclass LogclassReference A log class.
firewall.network_groups
Corresponding setting in web GUI: Networks and Computers on page Networks and Com-
puters
Table type: Dynamic
In this table all groups of computers/IP addresses are defined, to be used when configuring
the rest of the Ingate.
Field Name Field Type Explanation
interface OptVlanIfReference The interface or VLAN of the Ingate on
which this IP range is located.
lower_ip OptDnsIpAddress The first IP address in the range for this
group.
name GroupName A name of the network group. It is used
when referring to it from this or other tables.
subgroup SubGroup A reference to the ’name’ field. Used when
building a network group from multiple
other groups.
upper_ip OptDnsIpAddress The last IP address in the range for this
group. This field can be left empty if the
group is a single IP address.
firewall.own_logclass
Corresponding setting in web GUI: Log class for packets to the Telecommuting Module on
page Logging Configuration
Table type: Single row
The log class for packets addressed to the Ingate.
Field Name Field Type Explanation
logclass LogclassReference A log class.
firewall.ping_policy
Corresponding setting in web GUI: Policy For Ping To Your 3Com VCX IP Telecommuting
Module on page Basic Configuration
Table type: Single row
This setting specifies how the Ingate should reply to ping packets to its own IP addresses.
246