Administrator's Guide

Chapter 15. Command Line Reference
Field Name Field Type Explanation
enabled OnOffToggle Turn the STUN server on or off.
port1 OptPortNumber One port of the STUN server, used by both
IP addresses.
port2 OptPortNumber Another port of the STUN server, used by
both IP addresses.
server1 OptOwnIpReference One IP address of the STUN server.
server2 OptOwnIpReference Another IP address of the STUN server.
firewall.blind_route_policy
Corresponding setting in web GUI: Policy For Packets From Unused Gateways on page
Default Gateway
Table type: Single row
This policy controls how packets from currently unused gateways should be treated.
Field Name Field Type Explanation
action blind_sel The policy to use for packets from unused
gateways.
firewall.broadcast_logclass
Corresponding setting in web GUI: Log class for broadcast packets on page Logging Con-
figuration
Table type: Single row
The log class for broadcast packets received by the Ingate.
Field Name Field Type Explanation
logclass LogclassReference A log class.
firewall.default_policy
Corresponding setting in web GUI: IP Policy on page Basic Configuration
Table type: Single row
This setting specifies how the Ingate should treat packets that do not match any other con-
figured rule.
Field Name Field Type Explanation
action policy_sel The policy to use for packets that don’t
match any
firewall.dhcp_logclass
Corresponding setting in web GUI: Log class for DHCP requests on page Logging Config-
uration
Table type: Single row
245