Administrator's Guide

Chapter 15. Command Line Reference
Field Name Field Type Explanation
enabled OnOffToggle Turns the setting on or off.
fent.fent_keepalive
Corresponding setting in web GUI: NAT keepalive method, NAT timeout for UDP, NAT
timeout for TCP on page Remote SIP Connectivity
Table type: Single row
Type of keepalive to use for fented clients.
Field Name Field Type Explanation
tcp_timeout PositiveSysInteger Timeout for TCP - adapt to the NAT used
(seconds).
type fent_keepalive_sel Use which method to keep fented clients
alive.
udp_timeout PositiveSysInteger Timeout for UDP - adapt to the NAT used
(seconds).
fent.map_signal_address
Corresponding setting in web GUI: Remote Clients Signaling Forwarding on page Remote
SIP Connectivity
Table type: Single row
Map signaling address for remote users.
Field Name Field Type Explanation
listen_ip OptOwnIpReference Incoming destination IP address.
listen_port OptPortNumber Incoming destination port.
send_ip OptAliasIpReference Outgoing source IP address.
fent.media_release
Corresponding setting in web GUI: Media Route on page Remote SIP Connectivity
Table type: Single row
Route media directly between clients behind the same NAT.
Field Name Field Type Explanation
enabled OnOffToggle Turns the setting on or off.
fent.stun
Corresponding setting in web GUI: STUN Server on page Remote SIP Connectivity
Table type: Single row
Settings for the builtin STUN server.
244